Description
1 x Electrical Cutting Plier Jewelry Wire Cable Cutter Tool
RUIYITECH Electrical Cutting Plier Wire Cable Cutter Side Snips Flush Pliers Tool 170 Flush Cutter Internal Spring Cutting
£5.29
- It easily permeates through nearly any material with the swift and effortless gripping motion of the hand. The jaws are constructed of a high strength steel alloy. It’s a very hot wire cutter.
- In addition to strength, the manganese steel alloy provides for resistance to rust and corrosion. Constructed of high strength, Rockwell harness 65 rated, manganese steel alloy. Also you can use this wire cutters for jewelry
- Handle material: Plastic rubber, so you can handle this side snips flush pliers very comfortably.
- Cutting diameter: 5mm. It is a micro cutter.
- Easily permeates through nearly any material. small but Sharp flush cutters.
Additional information
| Weight | 30 kg |
|---|---|
| Dimensions | 12.7 × 1.52 cm |
| Product Dimensions | 19.56 x 12.7 x 1.52 cm; 30 Grams |
| Colour | Blue |
| Material | Alloy Steel |
| Item Package Quantity | 1 |
| Handle material | Plastic,Rubber,Steel,Manganese |
| Usage | 外部 |
| Batteries included? | No |
| Batteries Required? | No |
| Item Weight | 30 g |
| ASIN | B07Q8FJC3S |
| Date First Available | 2 April 2019 |
| Manufacturer | RUIYITECH |
colleen brown –
Decent wire cuttersGood value cutters sharp can’t say how long hey will last as only used few times hence 4 stars but they do seem well made great for d I y use
MR A N TOOP –
Not really suitable for fine detailed work but okay for use on electronics.And a lot of time looking on Amazon for a pair of replacement slips these look like good quality but unfortunately not.I purchased the snips to replace the broken ones that I was using with my 3-D printing, however, the cutting edge is not completely flush and it has trouble cutting really fine filament strands.If you are using it to cut components on electronic work no problem but I can probably suggest that just buying better quality slips from somewhere else.
sKEPtIc –
Flush sidecutters.My old unbranded pair still cut better and they are flush and sharper.Don’t like these.Save a few pounds and get the one’s that look the same but unbranded. The “extra” is only in the brand name. RUIYITECH products are overpriced and poor quality.
Santa –
Excellent tool.I bought these for cutting jewellery and they are sharp and slim, just what was needed.My only criticism, and why I took a star off, is that there is no clip to hold them closed when not in use. I use an elastic band, but a clip would have been better.
Helalien –
Does what it says on the tin (pun intended). Nice and sharp, and nice spring action.I’ve had a few pairs of these over the years, and these are about on par with some of the better ones I’ve had. Some of the slightly cheaper ones do break very very easily and a chip in the blade on a fine cutter like this can be brutal, but I’ve cut quite a bit of (thin) wire with these today and so far no marking on the blades at all.Not had them long enough to give a proper review, but of course use the correct tool for the job. If you are cutting thicker than 20G round or 22G flat wire then you probably want a thicker wire cutter, but for the fore-mentioned gauges (what this is designed for), perfect, no complaints.
Aleksejs Skorodumovs –
Only fir rough workSlightly misaligned. Perhaps just 0.2-0.3mm, but it’s enough to stress solder joints. Fine to use fore most things, but not the best quality.
mary gittens –
They workDoes the job
Joey the Newt –
Just what my husband needed for his projectJust what my husband needed for his project
mindi –
RubbishIf i could give it 0 stars i would. I even read the other reviews and thought it cant be that bad. It was. It doesnt work let alone the quality its pants.
Claire reeves –
Precise and perfect for coils!!Got these to cut wire for coils..absolutely perfect!!!