Description
QWORK 3 Pcs 1/4 Inch Hex Shank Quick Release Bar Socket Screwdriver Bit Holder , Magnetic Extension Chuck Adapter Set for Screws , Nuts , Drill , Driver , Drill Bit Set and Handheld Driver
QWORK 3 Pcs 1/4 Inch Hex Shank Quick Release Bar Socket Screwdriver Bit Holder , Magnetic Extension Chuck Adapter Set for Screws
£6.80
- 1) 3 pieces set with different length (60mm, 100mm, 150mm)
- 2) Quick change and release system allows you to quickly install, lock and unlock the bit easily
- 3) Magnetic bit holder provides convenient pick-up and retention of screws
- 4) Hex Shank: 1/4″ hex shank (6.35mm)can be easily fit into power driver, drill and handheld screwdriver
- 5) Extension set for all kinds of screwdriver bits, screwdriver head conversion uses
Additional information
| Weight | 109 kg |
|---|---|
| Dimensions | 3.99 × 1.5 cm |
| Part Number | WD1804 |
| Product Dimensions | 15.01 x 3.99 x 1.5 cm; 109 Grams |
| Item model number | WD1804 |
| Size | Variety Pack |
| Colour | Black/Silver |
| Finish | Painted |
| Material | Stainless Steel |
| Item Package Quantity | 3 |
| Number Of Pieces | 3 |
| Compatible fastener range | 0.25 inches |
| Batteries included? | No |
| Batteries Required? | No |
| Item Weight | 109 g |
| ASIN | B074QN5KJQ |
| Date First Available | 30 Nov. 2017 |
| Manufacturer | QWORK |
Dan S –
…There ok for the money not the best but not the worse
Daniel Bentley –
Good value for moneyWell made very strong and very useful with 3 sizes and good value
M. L. Mitchell –
Two out of three bentThe screwdriver bit holders seem well made, but upon trying them out it was immediately apparent that two out of three of them were bent – i.e. they do not rotate on the axis of the drill without seriously wobbling. The middle length one is straight. So my rating 2/5 is really a bit generous but 33% is closer to 40% than 20%.Seriously though, it’s disappointing that the quality of the product hasn’t been checked. It’s basic really. In both the short and the long one the bentness is clearly visible before trying it in the drill.I never give a negative review if something is made fit for the stated purpose and satisfactory – so it pains me to have to write this review.
Dublin –
Good valueGood value and easy to use
Theblacktele –
You need theseGood value for money, can’t believe i haven’t bought a set of these before?
Mark Lazzeri –
Quality productNot given it really hard use, but has worked very well on everything I’ve tried so far.
bill engles –
What I wantedSpot on
Mihai vira –
Don’t hold screwsThis bit holder can’t hold nothing… even small cabinet screws
paul smith –
Bit holderThe bit holder clip has come out on the to long one so I am not happy with that as the bit can come out when you use it
Alpiner –
Good qualityUsed them already. Good locking mechanism. Feels well made, and sturdy.