Mophorn Tap and Die Set 86 PCS Tungsten Alloy Steel Metric Tap and Die Kit for Cutting External and Internal Thread

(4 customer reviews)


  • Premium Quality: High-duty heat-treated Tungsten steel construction,  high-hardness, wear-resistance, and its service life is 5-10 times longer than that of non-tungsten taps, durable and reliable for your long-lasting use.
  • Excellent Performance: Fully ground & high-precision tap is super-sharp for your tapping and chip removing operation, running smooth and efficient, offering you excellent performance.
  • Reinforced Stability: Each dies is designed with a lock hole, it can be locked tightly after the screw is aligned and locked, ensures double stability during your operation.
  • Adjustable Tap Wrench: Tap wrench is adjustable: you can set the adjustable basin wrench to either its position for turning clockwise (tightening) or turning anti-clockwise (loosening). You can do this by flipping the jaws 180 degrees over its pivot.
  • Sae and Metric Included: This tap and die set comes with 86 pieces in total: 39 pcstaps,39 pcs dies, 2 tap holders (M6 to M20 – 1/4″ to 3/4″& M3 to M12 – 1/16″ to 1/2″), 2 die holders (M25 – 1″) & (M38 – 1-1/2″)and 1 T-bar tap wrench, most popular sizes included.
SKU: B07T3DJ551 Categories: , , ,


New 86pc Tap and Die combination set tungsten steel titanium SAE AND METRIC Tools

Condition: New
Material: Tungstem steel
Type: Tap & Die
Tap And Die set: Titanium
Number of Pieces: 86pc
Product Size:
Length: 50.8cm (20inch)
Width: 27.94cm (11inch)
Height: 7.62cm (3inch)
Net Weight: 5.9928kg (13.2lbs)
Volumetric Weight: 1.57717kg (3.473942lbs)
Package Size:
Length: 50cm
Width: 27cm
Height: 7cm
Gross Weight: 6kg

Package Content
X Adjustable Tap Wrench (M6 to M20 – 1/4″ to 3/4″)
1 X Long Handle Adjustable Tap Wrench (M3 to M12 – 1/16″ to 1/2″)
1 X T-Handle Tap Wrench
1 X Die Handle (M25 – 1″)
1 X Long Die Handle (M38 – 1-1/2″)
1 X Screwdriver
1 X Screw Pitch Gauge Metric
1 X Screw Pitch Gauge SAE

Additional information

Weight 5.55 kg
Dimensions 27.5 × 6.2 cm
Part Number


Item Weight

‎5.55 kg

Package Dimensions

‎38.2 x 27.5 x 6.2 cm; 5.55 Kilograms

Item model number


Power source type

‎Hand Powered

Item Package Quantity


Included Components

‎Tap and Die Set

Batteries Required?




Date First Available

12 Jun. 2019



4 reviews for Mophorn Tap and Die Set 86 PCS Tungsten Alloy Steel Metric Tap and Die Kit for Cutting External and Internal Thread

  1. Mr Mykhaylo Avakyn

    Everything is OKEverything is OK

  2. DJ

    Its what you payNot so bad and a good range of taps and dies the main problem is the box. It comes with a layer of taps and a layer of dies. To lift the top layer is a pain I’ve had to cut a sheet of Ali with some chord to enable me to lift out the top tray. if you are buying for low use DIY fine if it a more professional use look closely.

  3. TONY S

    Comprehensive Tap and Die Nut set.This is a great set to have for multipurpose threadcutting and cleaning / repair etc.The tools are titanium nitride coated for extra toughness and suit the most popular applications.The die nut form allows the use of a standard open or ring spanner for use in awkward places.Handy for finishing a bolt or screw held in the lathe. Good range of sizes. the kit is presented ina strong metal carry case to keep the tools safe. Good kit for garage mechanics as well as the toolroomor general workshop including DIY as well. very pleased with this.

  4. Frank Marrison

    Pretty goodNot fantastic but great value for money

Add a review

Your email address will not be published. Required fields are marked *