Makita HR2630 26 mm 3 Mode SDS Plus Rotary Hammer Drill. Do not abuse the cord. Never use the cord for carrying, pulling or unplugging the power tool. Keep cord away from heat, oil, sharp edges or moving parts. Damaged or entangled cords increase the risk of electric shock. Power tool plugs must match the outlet. Never
- 1 x HR2630 240 V rotary hammer SDS+ 26 mm
- 1 x Carry case
- 1 x Side handles
- 1 x Depth stop
From the manufacturer
- Maximum in concrete with TCT bit 26mm
- Maximum in concrete with TCT core 68mm
- Maximum in concrete with Diamond core 80mm
- Maximum in wood 32mm
- Maximum in steel 13mm
Please Note: Any accessories shown are not necessarily supplied as standard equipment.
HR2630/2 240V 26mm Rotary Hammer SDS-Plus
The HR2630 has a powerful 800 watt motor, to deliver up to 2.4 Joules of impact energy, 4,600 ipm and 1,200 rpm.
Compact and lightweight.
Variable speed trigger allows the operator to adjust the speed based on the material or application and has 3 mode operation, for rotation only, hammer with rotation or hammer only. The modified operation mode change lever enables to switch from rotation to hammering mode and vice versa without rotating the chuck. The torque limiter stops rotation if a bit jams to protect the motor and operator safety.
The HR2630 has 40 different bit angle settings, a one touch sliding chuck for easy bit instalation and removal, depth stop and a forward / reverse lever positioned to allow the brushes to be located so that the drill maintains the same speed and torque in both forward and reverse.