DUST COMMANDER HD: cyclone filter for individuals, workshops and industry.

The paper filter of a vacuum cleaner clogs quickly, reducing suction power at the inlet, which requires frequent cleaning/replacement of the filter. Replacing paper filters is costly and time consuming.

The DUST COMMANDER HD, a cyclone-type filter made of steel, is a complement to your workshop vacuum cleaner that will enable you to eliminate the defects of conventional filters. It allows the separation of wet and dry dust particles, thereby limiting the clogging of your vacuum cleaner filters and increasing their service life.

The cyclone separator collects the extracted particles in a sealed chamber that you attach to the base of the cyclone separator.

The cyclone separator filters 99% of the air its sucks up containing dust and fine particles, only depositing 1% of these on your vacuum cleaner filter, which considerably increases its operating life, power and efficiency.

The cyclone separator can be used for a variety of applications, including:

• sawing/sanding/wood machining
• interior renovation, DIY
• dust extraction from building sites (concrete, plaster, etc.)
• centralised vacuum cleaning
• etc.

PLEASE NOTE: this filter is only suitable for household or workshop vacuum cleaners (e.g. Karcher, Aquavac, Festool, Mafell, Fein, etc.) This filter is NOT compatible with chip collectors (HVLP) equipped with 100 mm inlets/outlets.

Special features of the HD model: carbon steel construction – ideal for intensive use or for the suction of abrasive particles.

Dimensions:

· External diameter of the inlet/outlet ducts: 50 mm.

· Total height: 392 mm.

· Cyclone diameter: 152/130 mm.·

· Construction: carbon steel

Package contents:

· 1 x DUST COMMANDER HD FILTER.

· 1 x ASSEMBLY KIT