Description
Combination of tap and die Set is manufactured from carbon steel. Taps and dies suitable for cleaning and cutting threads on mild steel and aluminium. Supplied complete in a two tone 1/4 drawer eva insert tray made from closed cell foam, suitable to be used in Draper and Draper expert tool chests and other manufacturers similar tool chests. The set includes: 7 metric dies size: 3 x 0.5, 4 x 0.7, 5 x 0.8, 6 x 1.0, 8 x 1.25, 10 x 1.5 and 12 x 1.75 – 1″ O/D, 2 BSP dies size: 1/8″ and 1/4″ BSP, 2 BSP taps size: 1/8″ and 1/4″ BSP, 7 metric plug taps (bottoming): sizes as dies, tap wrench-American pattern 1/2″ capacity, die holder 1″ O/D with guide, screwpitch gauge and screwdriver.
Viking –
Taps wouldn’t thread butterThe taps are very cheep and nasty I had to drill my holes to leave about .4 of a mill and they still struggled threading aluminium with expensive cutting fluid.
foxy james –
do the jobused twice and worked very well
Wm G.W. –
Screw it…I have only had this a few weeks, but, seems to be good quality, works well so far… time will tell, good service too
Maciej J. –
Low qualityAll die’s will need to be deburred before use, I was expecting more from draper
Mr Stephen Meadows –
For the price OKI mainly bought this for the BSP dies and taps. First problem, the tap wrench will not hold the largest tap necessitating the purchase of a larger tap wrench. The dies are not adjustable which makes it a bit more difficult on harder material eg steel but OK on Brass. If you want to use large taps, buy another set instead as it would be cheaper